building a inline six
Thread Starter
|
Freshman User
Joined: Nov 2005
Posts: 40
Likes: 0
From: wisconsin
building a inline six
hi i am planing on building a I6 for my 94 f-150 is there any good hop up part out there and has any body done this before also i have been thinking about cuting off both cats and put one high flow on will this make the computer throw any codes and will it make it run bad
thanx
thanx
Senior User
Joined: Jan 2005
Posts: 229
Likes: 0
From: Wichita, KS
94-
Welcome to FTE. Be sure to read the guidlines and such.
Read the stickies at the top of this forum, and also search and read some of the threads. You'll find all the info you could hope for.
Also check out the Ford Six and Inliners sites, as thtey have much information. You'll recognize some names from one to the other as well.
__________________
Paul
89 F-150 SC 4x4, 300, T-18
KANSAS Chapter
Welcome to FTE. Be sure to read the guidlines and such.
Read the stickies at the top of this forum, and also search and read some of the threads. You'll find all the info you could hope for.
Also check out the Ford Six and Inliners sites, as thtey have much information. You'll recognize some names from one to the other as well.
__________________
Paul
89 F-150 SC 4x4, 300, T-18
KANSAS Chapter
