Whats up everyone
Thread Starter
|
New User
Joined: Nov 2005
Posts: 2
Likes: 0
Whats up everyone
Just stopping by to introduce myself. Just so happens I sit next to Franken-Truck in one of the classes I take at TCC and he pointed me over to this site. I have a 1986 Bronco 2 I'll try and get a picture of soon(probably tommorow when I work on it after class). Heres a little list about it:
4.0 from a 91 explorer almost complete
-Comp Cams 410 camshaft
-JBA headers
-Gibson 2.5 stainless muffler
-little bit of head work
dana 35 front axle and 8.8 rear with 3.73 LS
31" BFG all terrains
James Duff 3in Stage 1 lift with dual shocks
Explorer spring pack in the back with flipped chevy lowering shackles
Rear driveshaft from Dick's driveshafts and stock front shaft(both need shortening now with the new axles)
Explorer front seats going in soon
4.0 from a 91 explorer almost complete
-Comp Cams 410 camshaft
-JBA headers
-Gibson 2.5 stainless muffler
-little bit of head work
dana 35 front axle and 8.8 rear with 3.73 LS
31" BFG all terrains
James Duff 3in Stage 1 lift with dual shocks
Explorer spring pack in the back with flipped chevy lowering shackles
Rear driveshaft from Dick's driveshafts and stock front shaft(both need shortening now with the new axles)
Explorer front seats going in soon
