A little help please.
Thread Starter
|
New User
Joined: Dec 2003
Posts: 16
Likes: 0
From: Port Washington, WI
A little help please.
I am attempting to re-install an engine (400m) in a '78 Bronco. I did not take this thing apart, but am the lucky one who gets to put it back together.
The problem I am having is with the vacuum lines. There is some sort of large black plastic thing on the front passenger side that has about a dozen vacuum hoses near or around it.
So, I was wondering if anyone on this site would be able to possibly email me some detailed pics of where these lines are supposed to run to. PM me for my email address.
Thanks in advance for your assistance.
The problem I am having is with the vacuum lines. There is some sort of large black plastic thing on the front passenger side that has about a dozen vacuum hoses near or around it.
So, I was wondering if anyone on this site would be able to possibly email me some detailed pics of where these lines are supposed to run to. PM me for my email address.
Thanks in advance for your assistance.
