wait to start light
Thread Starter
|
Junior User
Joined: Feb 2005
Posts: 73
Likes: 0
wait to start light
my wait to start light no longer comes on and it has been hard to start on cool mornings(60 degrees). My glow plugs, and solenoid were replaced last year. Is there anything else that could be causing my problem? Thanks
Elder User
Joined: Sep 2004
Posts: 824
Likes: 0
From: Helotes, Texas
Gotta double check myself, but the wait to start light should come on every time the key is turned on. It may be a burnt out bulb, but that wouldn't explain the starting difficulty. Watch the voltage guage when you turn the key on, it should stay low if the glowplugs are coming on, then once the glow plugs cycle off, it will return to the normal position.
Max
Max
Posting Guru
Joined: Aug 2004
Posts: 2,417
Likes: 4
From: Braham MN
can you hear the relay click when turning the key one??? and like max said does the gauge move way down???
all 4 lights over there should flash when the key is first turned on, are you getting them to flash might just be a burnt out bulb.
Diesel Rod
all 4 lights over there should flash when the key is first turned on, are you getting them to flash might just be a burnt out bulb.
Diesel Rod
