pinon seal
Posting Guru
Joined: May 2002
Posts: 1,300
Likes: 0
From: Southwestern Michigan
pinon seal
Not a problem.remove drive shaft,remove yoke, clean area thoroughly,seal should be easy to remove. Ihave used an old screwdriver and a hammer,bending the old seal away from the housing and pry it out. I use a big socket with the same O.D. as the seal for reinstalling in housing.make sure it is CLEAN CLEAN CLEAN!!!
Thread Starter
|
Senior User
Joined: Mar 2001
Posts: 103
Likes: 0
From: albuquerque USA ALL THE WAY
pinon seal
tellico,
thanks man i needed the reassurance that the pinon wasent going to fall into the diff i'll try it on mondayand let ya know how it goes again thanks a million
Louis
thanks man i needed the reassurance that the pinon wasent going to fall into the diff i'll try it on mondayand let ya know how it goes again thanks a million
Louis
