Exhaust fit problems.
Thread Starter
|
Posting Guru
Joined: Aug 2004
Posts: 1,130
Likes: 0
From: Rural Central Ohio
Exhaust fit problems.
Hey guys, working on the exhaust and I'm having some fittting problems. What did you guys do with the right side frame bracket that goes on top of the tranny crossmember? It seems like the downpipe won't line up with the 5" if that is still there.
Thanks
Thanks
Posting Guru
Joined: Feb 2003
Posts: 1,054
Likes: 0
From: The Great Plains
Originally Posted by cookie88
I also completely removed that big plastic sound isolater that hanger is attached to, makes it alot easier to work up there.
Thread Starter
|
Posting Guru
Joined: Aug 2004
Posts: 1,130
Likes: 0
From: Rural Central Ohio
Sry, what I meant was..do you have to re-use the metal bracket that holds the transmission crossmember to the frame? It seems removing that or getting a larger crossmember is my only option.
FTE Leadership Emeritus
Joined: May 2001
Posts: 13,653
Likes: 6
From: Cabot, Arkansas
Oh.....the bracket that sandwiches the crossmember onto the frame? There should be plenty of room there. Threre should be a slight bend in the intermediate pipe that allows you to rotate the downpipe up a little and still get good alignment downrange.
