Rancho shock length
Thread Starter
|
Fleet Mechanic
Joined: Feb 2001
Posts: 1,290
Likes: 15
From: Toronto, Canada
Rancho shock length
Anyone know the compressed length of a RS9009 that goes on the rear of my '78 250 4x4?
Trying to see if the shock will fit at my ride height.
Thanks!
Matt
Trying to see if the shock will fit at my ride height.
Thanks!
Matt
Thread Starter
|
Fleet Mechanic
Joined: Feb 2001
Posts: 1,290
Likes: 15
From: Toronto, Canada
Rancho shock length
I broke down and called the non-800 tech line. The compressed length of the 9009 is 15 5/8 inches. This is for a truck 1-3inches higher than stock. The front shock for this application is part# 9014 with a compressed length of 14 5/8 inches. Hope this helps someone!
Matt
Matt
Postmaster
Joined: Aug 2000
Posts: 3,312
Likes: 1
From: Eldorado Ca. USA
Rancho shock length
Here is a link for ya
http://www.pirate4x4.com/tech/bible/SHOCKLENGTH.xls
Tony
'77 F250, 4X4 460 transplantee, "Flamer"
'74 F250. 460, "beater" now "1 dead ford"
'73 F250, "midnight auto" now a trailer for the flamer
http://www.pirate4x4.com/tech/bible/SHOCKLENGTH.xls
Tony
'77 F250, 4X4 460 transplantee, "Flamer"
'74 F250. 460, "beater" now "1 dead ford"
'73 F250, "midnight auto" now a trailer for the flamer
