Cab mount crossmember needed!!!
Thread Starter
|
New User
Joined: Apr 2005
Posts: 24
Likes: 0
Cab mount crossmember needed!!!
Do any of you guys (or gals), who live in the dry states...AZ, NM, etc., have a rear cab mount crossmember for a 1986 F-350, diesel, w/manual trans? I live in MD and mine is rusted away so badly that the mounts fell right through the hole. The part isn't available through Ford. I've replaced the other brackets that hold the other 4 front mounts and would like to have a NICE RUST FREE piece to replace the rear. ANYBODY??
Thanks!!
Rob
Thanks!!
Rob
FTE Leadership Emeritus
Joined: May 2001
Posts: 13,653
Likes: 6
From: Cabot, Arkansas
Welcome to Ford Truck Enthusiasts hemiyota. We're glad you've chosen the best source for Fords.
Please read the forum guidelines. There is a link in my signature and a "sticky" thread at the top of the page.
Please read the forum guidelines. There is a link in my signature and a "sticky" thread at the top of the page.
Post Fiend
Joined: Nov 2003
Posts: 21,285
Likes: 16
From: Nutter Fort, WV
May mean a trip to the welding shop.
A salvage yard is your only other option.
Lots of the chassis parts for these older diesels are getting hard to find everywhere.
I make a lot of the things I replace on my 86.
Welcome to FTE, I wish I could offer something better for you.
A salvage yard is your only other option.
Lots of the chassis parts for these older diesels are getting hard to find everywhere.
I make a lot of the things I replace on my 86.
Welcome to FTE, I wish I could offer something better for you.
