Automatic vs Manual
Thread Starter
|
Senior User
Joined: Apr 2002
Posts: 115
Likes: 0
From: Morgantown US
Automatic vs Manual
I have a silly question...which transmission is most widely used for truck pulls (they pull the sled) Automatic or manual? I am considering building mine up some for the local fairs just for fun and I can go either way on the tranmissions....automatic or manual
Senior User
Joined: Feb 2002
Posts: 499
Likes: 0
From: Michigan
Automatic vs Manual
A lot of my buddies run sticks for the pulls.
1979 F350,4x4,NP435,5:13 gears,Detroit locker in rear with hardened shafts,ABR in the front,360 with 428 crank & rods,390 HP heads,Centerforce Dual Friction Clutch,MSD Ignition,39.5x18 Boggers,bucket seats out of a Lightning,& a Southern Body that is perfect.
1997 F350 PowerStroke 4X4,36 Inch Super Swampers, Strait Piped, Chiped, Propane Injected, LUK Clutch
1979 F350,4x4,NP435,5:13 gears,Detroit locker in rear with hardened shafts,ABR in the front,360 with 428 crank & rods,390 HP heads,Centerforce Dual Friction Clutch,MSD Ignition,39.5x18 Boggers,bucket seats out of a Lightning,& a Southern Body that is perfect.
1997 F350 PowerStroke 4X4,36 Inch Super Swampers, Strait Piped, Chiped, Propane Injected, LUK Clutch
