93 Ranger clutch
Thread Starter
|
New User
Joined: Sep 2005
Posts: 4
Likes: 0
93 Ranger clutch
Hello Folks, First posting, bare with?? 93 Ranger 2WD, 4cyl. with 197K, looks & runs great.
Discovered slave cylinder leaks. plan on replacing along with clutch and pressure plate,bearings... Purchased a Haynes shop manual. I know must drop trany - 5 sp. Looked on line for parts. wide range of clutch kit prices. Kevlar much more expensive. Not sure what kind of clutch kit or slave cylinder to buy $$$. Is it permitted to make suggestions. I would like to stay after market???
I have read the forum on bleeding tips, great info. thanks to all.
Any other tips concerning this project would be greatly appreciated, I haven't
turned a wrench in 20 yrs. Looking forward to getting my hands dirty,
thanks again
gstocker from PA
Discovered slave cylinder leaks. plan on replacing along with clutch and pressure plate,bearings... Purchased a Haynes shop manual. I know must drop trany - 5 sp. Looked on line for parts. wide range of clutch kit prices. Kevlar much more expensive. Not sure what kind of clutch kit or slave cylinder to buy $$$. Is it permitted to make suggestions. I would like to stay after market???
I have read the forum on bleeding tips, great info. thanks to all.
Any other tips concerning this project would be greatly appreciated, I haven't
turned a wrench in 20 yrs. Looking forward to getting my hands dirty,
thanks again
gstocker from PA
Post Fiend
Joined: Feb 2003
Posts: 6,940
Likes: 2
From: Eastern WA
Originally Posted by gstocker
Any other tips concerning this project would be greatly appreciated
LUK is OEM and they just go and go. I'd suggest using that rather than some off beat brand.
