Upcoming Events
Thread Starter
|
Posting Guru
Joined: Feb 2002
Posts: 2,404
Likes: 3
From: Cleveland, WI USA
Upcoming Events
Thought I'd throw out a few events that are going on around here in the next few weeks. These are the ones I'll be going to at least.
Sept. 14-18
Wisconsin State 4H Horse show at State Fair Park in Milwaukee
(for those horse folks out there)
Sept. 16th
Budwiser Eve of Destruction at WIR in Kaukauna (VERY good time)
Sept. 24-25
Jefferson Fall car show and swap meet.
If anyone else planns on attending any of these, let me know and we can possibly hook up for a cold one.
K.
Sept. 14-18
Wisconsin State 4H Horse show at State Fair Park in Milwaukee
(for those horse folks out there)
Sept. 16th
Budwiser Eve of Destruction at WIR in Kaukauna (VERY good time)
Sept. 24-25
Jefferson Fall car show and swap meet.
If anyone else planns on attending any of these, let me know and we can possibly hook up for a cold one.
K.
Senior User
Joined: May 2003
Posts: 294
Likes: 0
From: Jefferson WI
we will be there both days, same spot, not much left to sell though. a few off and end trinkets, Ron has some rims and gears and we each have a 70's truck for sale.
Anyone planning to be there on saturday we are planning to go out for supper on saturday nite. Switching restaurants and heading to Andys....heading towards last years restuarant on 26. Andys will be next to the no longer Hardees and JUST BEFORE THE HAVILL SPOERL DODGE dealer.
Anyone planning to be there on saturday we are planning to go out for supper on saturday nite. Switching restaurants and heading to Andys....heading towards last years restuarant on 26. Andys will be next to the no longer Hardees and JUST BEFORE THE HAVILL SPOERL DODGE dealer.
Senior User
Joined: May 2004
Posts: 207
Likes: 0
From: Wisconsin
i have heard of the jefferson swap meet, but never been there. will definitely be there to check it out on one of those days. are there many parts for older fords there? mine is a early 77 f250 4x4, 400, c6, divorced np 205, and i've been buying lots of parts for it lately. always interested in a good deal..
Last edited by sparky69; Sep 19, 2005 at 01:24 PM.
Senior User
Joined: May 2003
Posts: 294
Likes: 0
From: Jefferson WI
there is lots of that vintage stuff. Stop by our stalls I am sure you will see some. jefferson has a little of everything to offer. the worst though it is huge and not one single flavor so you have to look all over, high/low behind around to find it. I am sure its there. What are you exactly looking for? I can keep my eyes open for you there too.
Senior User
Joined: May 2003
Posts: 294
Likes: 0
From: Jefferson WI
yep we will be there same place as the last how many years. White field Wn 110-113 orWo 112/113. Have some 73-79 trucks and parts and some other stuff too. Stop by if you get there.
How much for the engine work on the 390- need to get some 390 work done for the cyclone this fall or winter.
How much for the engine work on the 390- need to get some 390 work done for the cyclone this fall or winter.
Trending Topics
Freshman User
Joined: Jan 2004
Posts: 47
Likes: 0
about $700 for the bottom end work : clean, bore, resurface flywheel, resize rods + new small end bearings, freeze plugs and cam bearings, and grind crank
about $700 for the heads including springs, guides, retainers + resurface and valve job, cut in for larger valves + install hardened seats
Definitely not the cheapest or fastest I've seen but they did excellent work
about $700 for the heads including springs, guides, retainers + resurface and valve job, cut in for larger valves + install hardened seats
Definitely not the cheapest or fastest I've seen but they did excellent work
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
2026 Shelby F-150 Off-Road: Better Than a Raptor R?
Brett Foote
2027 Super Duty Carhartt Package First Look: 12 Things You NEED to Know!
Michael S. Palmer
10 Most Surprising 2026 Ford Truck Features!
Joe Kucinski
Top 10 Ford Trucks Coming to Mecum Indy 2026
Brett Foote
5 Best / 5 Worst Ford Truck Wheels of All Time
Joe Kucinski
Senior User
Joined: May 2003
Posts: 294
Likes: 0
From: Jefferson WI
73--I have a 1979 stepside(nice clean box) shortbox 2wd 460 auto, a 1977 4x4 f250 460 and maybe a 75 super camper special with the set back axle. the 4x4 will be there for sure and the stepside is ust up the road. If your looking for something in particular drop me a line, I am sure with bluenitecrew or I have it. Quite a collector and need to make room for other "projects". we will be there selling all weekend.
Mark- thanks for the info would like to get that 67 Cyclone project done this winter along with a Packard that I inherited. Did they assemble the lower end together or did you do it yourself. Not sure which way I want to go on that yet.
Mike
Mark- thanks for the info would like to get that 67 Cyclone project done this winter along with a Packard that I inherited. Did they assemble the lower end together or did you do it yourself. Not sure which way I want to go on that yet.
Mike
Last edited by mpcrewcab; Sep 20, 2005 at 08:22 PM.
Freshman User
Joined: Jan 2004
Posts: 47
Likes: 0
Mike - I did bottom end assembly and port + polish on the heads myself. They assembled the pistons and the heads. I'll stop by Sat to say hey.
Anyone interested in any misc parts from a '66 F-250 2wd w/ a 352?
I have a set of 16" 8 lug rims, a 352 crank, valve covers, forged I-beams, good a-arms, oil pan, rear leafs (Camper Special - heavy duty)
I can bring them up to Jefferson on Saturday.
Mark
Anyone interested in any misc parts from a '66 F-250 2wd w/ a 352?
I have a set of 16" 8 lug rims, a 352 crank, valve covers, forged I-beams, good a-arms, oil pan, rear leafs (Camper Special - heavy duty)
I can bring them up to Jefferson on Saturday.
Mark
