BIG! thanks for advice
New User
Joined: Apr 2002
Posts: 16
Likes: 0
BIG! thanks for advice
You guys were right on with your advice about replacing my knigpins. The shop I took it to spent all day working on it and ended up ruining a Snap-On chisel hammer (whatever that is).
They had to break out the oxy-acetyline and two guys took turns off and on all day getting the old ones out. NO WAY I could have done it myself. Ended up costing me $270 including turning my rotors and an alignment. I wanted to tackle it myself but you guys were dead on with your advice and I seriously appreciate it.
'73 F-100, 2w/d, 390, a/c, lwb.
!!!!!!!!!!!!!!!!!!!!!!!!!
They had to break out the oxy-acetyline and two guys took turns off and on all day getting the old ones out. NO WAY I could have done it myself. Ended up costing me $270 including turning my rotors and an alignment. I wanted to tackle it myself but you guys were dead on with your advice and I seriously appreciate it.
'73 F-100, 2w/d, 390, a/c, lwb.
!!!!!!!!!!!!!!!!!!!!!!!!!
