walk me through this...hub replace
Thread Starter
|
Elder User
Joined: Jan 2004
Posts: 706
Likes: 0
walk me through this...hub replace
OK, going to the junkyard tommorrow to acquire a set of auto locking hubs. What will I need to take the old off? What parts do I need to get for the exchange? Any special tools needed? I'm assuming this can't be too tough a job....am I wrong? My Chilton's manual is worthless on describing this process.
Elder User
Joined: Jul 2005
Posts: 520
Likes: 0
What year do you have? Are the hubs "floating"? (some just slide off in your hands after removing the wheel)
If they aren't "floating" you'll need snap-ring pliers, large sockets, possibly a magnet.. but it varies from year to year...
If they aren't "floating" you'll need snap-ring pliers, large sockets, possibly a magnet.. but it varies from year to year...
