Notices
Explorer, Sport Trac, Mountaineer & Aviator 1991-1994, 1995-2001, 2002-2005, 2006-2010 Ford Explorer

97 Explorer Exhaust problems list needed..

Thread Tools
 
Search this Thread
 
Old Jul 15, 2005 | 10:14 PM
  #1  
jlouki01's Avatar
jlouki01
Thread Starter
|
New User
Joined: Jan 2004
Posts: 23
Likes: 0
97 Explorer Exhaust problems list needed..

I have a 97 Explorer AWD V8 that has an exhaust tick coming from under the vehicle. I can't really pin down where it is coming from, I don't see anything rusted overly bad or anything. I know on the old Nissan Pathfinders it was a huge problem with the Exhaust manifold bolts cracking and causing a nice tick under the hood.... These explorers have any known issues like that??

Jeremy
 
Reply
Old Jul 15, 2005 | 10:21 PM
  #2  
K2JJB's Avatar
K2JJB
Elder User
Joined: May 2004
Posts: 508
Likes: 0
From: Webster, NY
The right hand side exhaust manifold is known to crack and cause ticking on the 5.0L motors.
 
Reply
Old Jul 15, 2005 | 10:26 PM
  #3  
uncleben03's Avatar
uncleben03
Junior User
Joined: Nov 2003
Posts: 93
Likes: 0
From: Urbana, IA
I'm interested too. my 2000 v8 awd does the same thing every once in awhile.
 
Reply
Old Jul 15, 2005 | 11:03 PM
  #4  
Spectramac's Avatar
Spectramac
Posting Guru
Joined: Oct 2003
Posts: 2,438
Likes: 0
From: Monroe, WA
Same here 97 V-8 AWD! I've seen new manifolds on Ebay for $135.
 
Reply
Old Jul 21, 2005 | 04:26 PM
  #5  
5.0EBExplorer96Snow's Avatar
5.0EBExplorer96Snow
Junior User
Joined: Oct 2003
Posts: 55
Likes: 0
Hey fellas try this site. http://www.bishopengine.com/ They have new for 115.00 reconditioned for 90.00
 
Reply
Old Jul 26, 2005 | 07:55 PM
  #6  
norrislaketn's Avatar
norrislaketn
Junior User
Joined: Aug 2003
Posts: 53
Likes: 0
I have one bolt on the right side manafold that keep backing out, even with thread lok on it. I keep putting it back & torquing it. Check for missing bolts.
 
Reply
Old Jul 27, 2005 | 12:28 PM
  #7  
Meder127's Avatar
Meder127
New User
Joined: May 2004
Posts: 15
Likes: 0
mine had the same prob and i pulled the pass manifold off and it was completly broken in two. i got some nickel 55 welding rods and welded it back together. its just like new now.
 
Reply




All times are GMT -5. The time now is 08:06 AM.