I need someone's help, please.
Thread Starter
|
Senior User
Joined: Apr 2003
Posts: 164
Likes: 0
From: Heart of Dixie
I need someone's help, please.
I'm looking for a specific EEC-IV computer that I believe is a CA version. It's from a 1995 F150 with a 351W and E4OD trans. The 4-digit calibration code must be either, ACK0 or BIO0. This is VERY important. Tweecer has more support for these 2 processors. If someone could find one of these on a junkyard mission, I would be grateful. The cheaper the better, no more than $120. I can get a BFN one for $200. Thanks. I live in Huntsville, AL which is why I'm asking.
Philip Brewer
brewer69@hiwaay.net
Philip Brewer
brewer69@hiwaay.net
New User
Joined: Jul 2005
Posts: 9
Likes: 0
dude you dont need our help looking at our junkyards when you can look at every ones. it called the internet and alot of yards are in there advertising with catalogs or part searches were they will email you back when they find it and how much it going to cost.
Fleet Mechanic
Joined: Sep 2004
Posts: 1,674
Likes: 2
From: Rowland Heights
Thread Starter
|
Senior User
Joined: Apr 2003
Posts: 164
Likes: 0
From: Heart of Dixie
Yeah, I've seen that internet thing before. I've called yards before and they have never helped. One guy absolutely refused to sell me parts because he didn't know if they would work (spring perches for a 2wd with sway bars).
