The right headers

Reply Subscribe

Thread Tools

Search this Thread

Jul 4, 2005 | 10:43 AM

pup55

Thread Starter

Freshman User

Joined: Nov 2004

Posts: 29

Likes: 0

The right headers

i have a 93 bronco 302 5.0L I am getting these headers http://www.car-stuff.com/performance/quote.php?make=5&year=1993&model=21&brand=10&part_ name=19&category= They are ford racing and they say they fit my bronco with a 5.0L. Are these good headers and i just want to make sure they fit my truck. I looked at it and they look diffrent than the others i was looking at. The right side one goes straight down where it connects to the stock exhaust and the other ones go at more of an angle. is this ok

Thanks

Last edited by pup55; Jul 4, 2005 at 10:46 AM.

Jul 4, 2005 | 05:51 PM

MBBFord

Post Fiend

Joined: Mar 2005

Posts: 8,542

Likes: 5

From: Louisiana

If they say they fit, well you can only take their word for it till you try. BUT before you even get them, make sure to lube up all the bolts on the exhaust manifolds to make it easyer to get them off.

-Matt

Jul 5, 2005 | 12:15 AM

94 XLT White/ Silver 302

Elder User

Joined: Jul 2003

Posts: 599

Likes: 0

From: VB. Virginia

The header with the collector going straight down is for a 5.8, The picture their showing is for the 5.8 but the part no. appears to be for the 5.0 #M9430T50, the 5.8 part no is M9430T58 notice the last two digits of the part no. T50 is 5.0, T58 is 5.8 engine. The pictures don't always show the correct headers. Get the headers with the T50 part no. and you will be good to go. Hope this helps