400 temp gauge

Reply Subscribe

Thread Tools

Search this Thread

Jun 25, 2005 | 08:34 PM

Highstepn

Thread Starter

New User

Joined: Apr 2005

Posts: 16

Likes: 0

From: Bellville Ohio

400 temp gauge

Where can I find the temp gauge on the 400 motor itself? I have gauge problems and want to trouble shoot, thought I would start at motor and work my way back to instrument panel. Any help would be greatly appreciated.

Thanks

Jun 25, 2005 | 09:09 PM

go_racing84

Laughing Gas

Joined: Aug 2004

Posts: 964

Likes: 1

From: Roseburg, OR

On the block, directly below the front of the passenger side head. If you want to install an aftermarket gauge, you have plenty of options. There's the aforementioned port, a port on the water pump, and mine had two on the thermostat housing

Jun 26, 2005 | 06:41 AM

Highstepn

Thread Starter

New User

Joined: Apr 2005

Posts: 16

Likes: 0

From: Bellville Ohio

Thanks, I will take a look this afternoon. I had looked at all my diagrams and just could not tie down the location.

Jun 27, 2005 | 07:01 PM

Highstepn

Thread Starter

New User

Joined: Apr 2005

Posts: 16

Likes: 0

From: Bellville Ohio

Found it, I checked resistance with ohm meter and found guage to be good. Pulled out temp switch and found it was cracked around the outside.

Thanks for all the help.

This forum is excellent for us less knowledgeable mechanics.

Reply Subscribe

Reply Share

First
Prev
1 / 1
Next
Last

Forum Jump