Changing Manual Fuel Pump
Thread Starter
|
Freshman User
Joined: Mar 2005
Posts: 47
Likes: 0
From: ELMIRA, NEW YORK
Changing Manual Fuel Pump
say is it very hard to change the lever arm fuel pump. mine is mounted down along the right side on the 302? and is there something i should know about installing it?
Last edited by Mil1ion; Jun 20, 2005 at 11:05 PM.
Senior User
Joined: Jan 2001
Posts: 380
Likes: 1
From: Meriden USA
No they arent too hard. Just those two bolts you see. Just make sure to clean the gasket surface good so you dont have a leak. You might have to bump the engine over to get the encentric to line up right to bolt the new fuel pump in.
Thread Starter
|
Freshman User
Joined: Mar 2005
Posts: 47
Likes: 0
From: ELMIRA, NEW YORK
more info. on fuel pump.
Ok i got everything ready to install the new one arm manual fuel pump to this 302. But somebody said make sure the engine is on TDC. Now my question.
how do i know when or where to check that the engine is TDC?
how do i know when or where to check that the engine is TDC?
