need help id'ing stuff!
Thread Starter
|
Elder User
Joined: Dec 2002
Posts: 738
Likes: 2
From: McChord AFB
need help id'ing stuff!
Ok i just got a 1964 F-250. Its sweet, but i need some help. I need to find out what rear end and tranny it has in it or ways i can find out. First off it has a 223 I-6 whith a 4speed, first gear is a granny gear and reverse is up and to the right. Then the rear end is a full floating 8lug axle and the drums perty well fill up the 16.5 rims on it. The diff cover is symetrical too. Thanks for the help help guys.
Posting Guru
Joined: Jan 2002
Posts: 1,836
Likes: 3
From: Elizabethtown, PA
Postmaster
Joined: Dec 1999
Posts: 2,813
Likes: 6
From: Connecticut
Look on the lower row of the door tag under "axle". Post that code. Also look for the tag that may still be on one of the bolts that hold the rear end cover on. Right now, all that can be said is it's a Dana 60 axle.
Barry
Barry
Senior User
Joined: Sep 2004
Posts: 446
Likes: 0
From: Texas
Vin will tell you alot, unless it's not stock.
The rear axle is either a Dana60 or a Ford 9". The Dana has a cover with bolts holding it on on the back of the axle. the Ford 9" has a center section that bolts in from the front. On the ford's passanger side axle tube there will be a few ID numbers that tell what gears are in it.
The 4 speed with a granny is probably an NP435. There are a few others, but the NP435 has a very deep granny and used in heavy duty applications and 4X4s.
The rear axle is either a Dana60 or a Ford 9". The Dana has a cover with bolts holding it on on the back of the axle. the Ford 9" has a center section that bolts in from the front. On the ford's passanger side axle tube there will be a few ID numbers that tell what gears are in it.
The 4 speed with a granny is probably an NP435. There are a few others, but the NP435 has a very deep granny and used in heavy duty applications and 4X4s.
Trending Topics
Postmaster
Joined: Dec 1999
Posts: 2,813
Likes: 6
From: Connecticut
The tranny could also be a T-18 which has reverse over to the right and up. NP 435 is over and down.
Barry
Barry
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
10 Things Every Truck Owner NEEDS (2026 Edition)
Michael S. Palmer
Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
Thread Starter
|
Elder User
Joined: Dec 2002
Posts: 738
Likes: 2
From: McChord AFB
i know itdosnt have the 435 or a 9", 82 F-150 has a 435 gear box and a 9". The axle just didnt look like the Dana 60s i have seen (but all of those have been front end GM axles). I was wondering if it was a T-18 myself. Is there a ID plate somewhere on the tranny to look for?
Last edited by MEPR; Jun 11, 2005 at 12:04 AM.
Postmaster
Joined: Dec 1999
Posts: 2,813
Likes: 6
From: Connecticut
Usually the "T-18" is cast into the case on the side. The second line of your serial number plate has all the codes to identify the trans, rear end and ratio, etc... Alot easier than crawling on the ground. Just list them and we can tell you what you've got.
Barry
Barry
Thread Starter
|
Elder User
Joined: Dec 2002
Posts: 738
Likes: 2
From: McChord AFB
ok the truck was spray painted so i cant realy read anything but the stamped numbers and letters on the door tag. But here is what it looks like...
VIN#
128 K F250 081 F26
7500 114 3600 74
Thanks for the help again guys.
VIN#
128 K F250 081 F26
7500 114 3600 74
Thanks for the help again guys.
Postmaster
Joined: Dec 1999
Posts: 2,813
Likes: 6
From: Connecticut
Here's what I deciphered:
128= wheel base in inches
K= exterior color ( not listed in my book)
F250= model
081= Regular or standard cab with black all vinyl bench seat
F26= F 250 4x4
7500= GVW
114= hp generated at below listed RPM
3600= RPM
74= DSO ( district sales office, Seatttle)
Barry
128= wheel base in inches
K= exterior color ( not listed in my book)
F250= model
081= Regular or standard cab with black all vinyl bench seat
F26= F 250 4x4
7500= GVW
114= hp generated at below listed RPM
3600= RPM
74= DSO ( district sales office, Seatttle)
Barry
Thread Starter
|
Elder User
Joined: Dec 2002
Posts: 738
Likes: 2
From: McChord AFB
well then the cab or maybe just the door is not from my truck. My truck is a 2wd so i guess ill just crakc open the axle and start looking for ID numbers and such on the ring gear to find out my gear ratios and axle modle...
