Chrome on the tail gate
Chrome on the tail gate
Lead Driver
Joined: Sep 2002
Posts: 9,182
Likes: 12
From: Gateway to the West
Its brushed aluminum but it should fit any T-gate from 1980 through 1996. You will need to drill about ten holes in the gate to get the expansion pins and 10/32 studs to slip into place.
Thread Starter
|
Elder User
Joined: Jan 2005
Posts: 656
Likes: 1
From: Houston
greystreak92, I am removing an old dented one to replace with this 94-96 one. Are you saying, because of the different year it will fit, but I will need to drill some holes?
Thank You
Thank You
Elder User
Joined: Jul 2003
Posts: 599
Likes: 0
From: VB. Virginia
If your removing an old aluminum panel the 94-96 will bolt into the same holes, the only difference is the 94-96 panel has a black reflector instead of the red reflector the earlier Bronco's had.
Thread Starter
|
Elder User
Joined: Jan 2005
Posts: 656
Likes: 1
From: Houston
Thanks guys. thats what I needed to know. There is one on e-bay for $50 plus $25 shipping, do you think that is a good deal, or would a bone yard be better. Do you all know if, when I have them both off, can I replace the red reflector with the black reflector?
