'96 bullydog 6 position chip problem
Thread Starter
|
New User
Joined: Jul 2003
Posts: 19
Likes: 0
From: wv
'96 bullydog 6 position chip problem
installed a 6 position bullydog chip (41611) today in '96 250 automatic truck ...
everything is great ...
EXCEPT
the "valet" and "high position" positions seem to be reversed
in the valet position the truck runs like stock
in the high position the truck falls on its face at approx 60ish mph
any thoughts
everything is great ...
EXCEPT
the "valet" and "high position" positions seem to be reversed
in the valet position the truck runs like stock
in the high position the truck falls on its face at approx 60ish mph
any thoughts
Elder User
Joined: Oct 2004
Posts: 602
Likes: 0
I bought a bully dog for my 6 speed and was sent a unit tuned for a auto. I didn't noticed that and installed it. So it was running really wierd and throwing codes like auto tranny specific things, torque converter etc.. I called four wheel parts and they re-programed it right on the spot. I'm sure somebody just had the dial set at the wrong spot when they tuned your chip. They will take care of you.
Thread
Thread Starter
Forum
Replies
Last Post
77hiboyboy
1999 - 2003 7.3L Power Stroke Diesel
17
Mar 28, 2005 10:53 PM
