transfer case id
Thread Starter
|
New User
Joined: Jul 2003
Posts: 17
Likes: 0
transfer case id
i have a 1979 ford f-250 with a 400 C-6. i am trying to find out what tranfer case i have i have looked for a tag like what is on the axles but have been unable to find anything that will id the case. can anyone tell me where to look or if there was a standard case for this year of truck
Senior User
Joined: May 2005
Posts: 150
Likes: 0
From: Green Valley, AZ
We'll need just a little more info...
1. Does the case have lo range?
2. Does it have hi loc and lo loc?
It is probably a New Process model 203 or 205. If it has hi lock and lo loc, it'll be a 203 for sure. Not my favorite case, but there are alot of them out there.
If it has 4L, N, 2H, and 4H, it SHOULD be the NP 205. I think Dana made a single speed T case sometime in the 70's on fords, but I don't remember when or in what trucks...
1. Does the case have lo range?
2. Does it have hi loc and lo loc?
It is probably a New Process model 203 or 205. If it has hi lock and lo loc, it'll be a 203 for sure. Not my favorite case, but there are alot of them out there.
If it has 4L, N, 2H, and 4H, it SHOULD be the NP 205. I think Dana made a single speed T case sometime in the 70's on fords, but I don't remember when or in what trucks...
Last edited by fordmtnman; May 15, 2005 at 06:12 PM.
Postmaster
Joined: Nov 2003
Posts: 4,392
Likes: 1
From: Cab of a truck
Sounds like a NP205. Very strong gear driven transfer case.
http://www.offroaddesign.com/Transfe...ID%20Guide.htm
http://www.offroaddesign.com/Transfe...ID%20Guide.htm
