When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hi I have a 87 b2, & have a vibration unsure of where it is comming from.
I have done the following.
Put in the third drive shaft in 36,000 km (22,500 mile), the seal joints were not lubed correctly.
new front rotors
new front wheel bearings
new ball joints
passenger rear axle
new rear bearings & seals - both sides
New 2000 ranger leaf springs
Redrilled rear lower shock brackets, the hole was 7/16",bolt was 3/8"& shock
was 1/2", So resized to all are 1/2".
had all tires rebalanced & rotated
It starts around 50km (30mph)
Any insite would be great
Thanks 87b2