Rusted Spark Plugs
Thread Starter
|
New User
Joined: Jul 2004
Posts: 7
Likes: 0
Rusted Spark Plugs
I have a 98 with the 4.2L V-6. My problem is that I can't seem to get the spark plugs to break free to replace them. Any suggestions on how to get them to break loose? I have to make a small road trip on wedesday, and would like to get this done before the trip. Thanks!!!
Senior User
Joined: Oct 2004
Posts: 475
Likes: 0
From: Portsmouth,VA
Spray with PB blaster and use a breaker bar, and when you get them loose if you fell it tight just spray with some more pb blaster and tigten them a little and then lossen a little more and then tighten alittle until they are out, and before putting new ones in use some anti seize compound on them so they won't be tight again
just becarful not to break the plugs
just becarful not to break the plugs
