changing out power locks
Thread Starter
|
Junior User
Joined: Nov 2004
Posts: 62
Likes: 0
From: Back woods Mississippi.
changing out power locks
Hey Guys,
I finally got around to checking out my power door locks. They'll try to work but they don't completely lock or unlock. They haven't worked in a while and I've just been putting it off. When I removed the door panel it didn't look like what I was expecting. So tell me, is the actuator and the latch made together or did I miss something? Is this a hard project and how much are the new parts going to cost me? Any info will help. Thanks
I finally got around to checking out my power door locks. They'll try to work but they don't completely lock or unlock. They haven't worked in a while and I've just been putting it off. When I removed the door panel it didn't look like what I was expecting. So tell me, is the actuator and the latch made together or did I miss something? Is this a hard project and how much are the new parts going to cost me? Any info will help. Thanks
Elder User
Joined: Jul 2004
Posts: 756
Likes: 1
There are a few threads on this. I did a search and found the typed proceedure here on FTE.
This should lead you the right way.
https://www.ford-trucks.com/forums/s...d.php?t=368875
This should lead you the right way.
https://www.ford-trucks.com/forums/s...d.php?t=368875
