4.2 engine swap
Thread Starter
|
New User
Joined: Jan 2005
Posts: 1
Likes: 0
4.2 engine swap
i have a 1997 f150 with the 4.2 v6 engine and i have thrown a rod, i am currently in school so money is tight and i was wondering if anyone knew if a different engine would fit and the mods needed to do so. reply with any info that would help or email me at army_cowboy16@hotmail.com
Hotshot
Joined: Aug 2002
Posts: 12,679
Likes: 15
From: BC, Canada
Hi and welcome to the forum 
If you snoop around in here a bit you'll find a few questions pretty much the same.
Basically there isn't anything else that will come even close to bolting in without a lot of work and money.
I would think you could probably find a good used 4.2 for not too much money.
If you snoop around in here a bit you'll find a few questions pretty much the same.
Basically there isn't anything else that will come even close to bolting in without a lot of work and money.
I would think you could probably find a good used 4.2 for not too much money.
