Need parts or other solution
Thread Starter
|
New User
Joined: Apr 2005
Posts: 2
Likes: 0
Need parts or other solution
Need all bolts,clips,and brackets that hold the top of my 95 Bronco.
I have the trim parts with the exception of the center piece of the arch.
Color tan. I've been informed FORD does't stock them any more.
Does any one here know of any source?
Any help would be appreciated.
I have the trim parts with the exception of the center piece of the arch.
Color tan. I've been informed FORD does't stock them any more.
Does any one here know of any source?
Any help would be appreciated.
New User
Joined: Jan 2008
Posts: 0
Likes: 24
Lead Driver
Joined: Sep 2002
Posts: 9,182
Likes: 12
From: Gateway to the West
Your best bet is to replace the hardware with regular hex head bolts especially if you plan on removing the top again. Spring nuts and bolts are all you really need. There are those two bracket-type things that go along the "B" post but I've never put them back in. The top seems to do just fine without them. In truth, I only run with the two rear corner bolts and the two top corner bolts. If you want a set of the Tamper-proof Torx, I probably have a set floating around here somewhere. But like I said, it'd be easier to find hex head metric bolts to ease removal in the future. I used to know the metric thread pitch but can't recall what it is off the top of my head. If I think of it I'll post.
Lead Driver
Joined: Sep 2002
Posts: 9,182
Likes: 12
From: Gateway to the West
Oh, yeah, forgot about that part. I havent' had the trim back in mine since the first time I yanked the top off it. Too much time and effort when I am im just gonna pull it all off again when the weather turns nice.
