Clamp causing SES light
Thread Starter
|
Freshman User
Joined: Jun 2004
Posts: 27
Likes: 0
Clamp causing SES light
Greetings,
What is the best way to stop the SES light from comming on when I floor it with my "clamp" switch in the on position???
I would like to wish everyone a happy "bunny day" Try not to eat to many of those marshmello PEEP's... (what the heck are those things anyway????)
Thanks, Scott
What is the best way to stop the SES light from comming on when I floor it with my "clamp" switch in the on position???
I would like to wish everyone a happy "bunny day" Try not to eat to many of those marshmello PEEP's... (what the heck are those things anyway????)
Thanks, Scott
FTE Leadership Emeritus
Joined: May 2001
Posts: 13,653
Likes: 6
From: Cabot, Arkansas
It depends on what's causing the light. If it's overboost you need one of the commonly available overboost eliminator kits. My favorite is the mini-regulator from ITP. If it's exhaust backpressure you can replace the tube and or sensor....or get an EBPS eliminator from SP Diesel. If an ICP error is causing the light you will just have to live with it.
I think the highest probability is overboost. I think you shuld pursue that avenue first.
I think the highest probability is overboost. I think you shuld pursue that avenue first.
