pcv
Thread Starter
|
Fleet Owner
Joined: Jan 2004
Posts: 26,007
Likes: 575
From: Brentwood,CA
pcv
do you need to run the pcv the carb i bought does not have a hook up for one and the only vacuum hose i could use is going to the brake booster could i put a tee in the line and use it but the vacuum fitting is right in front of the number 4 piston won't all the gases from the pcv go into that piston and that piston only would that be a problem could that cause it to run rough or foul the plug.
Needsmorecoffee.
Joined: Oct 2004
Posts: 3,624
Likes: 2
From: CT
What year 390? And does the intake have a rear breather plate or is it solid and unmachined? If the intake has the removable plate you can replace the plate with one that has a nipple and run the PVC from the pass valve cover to the rear breather nipple. Just a thought but not sure what your working with. G.
New User
Joined: Mar 2005
Posts: 14
Likes: 0
I don't know what type of air cleaner you have, but I'll assume a standard round open element. What you can do is drill the underside of the filter base, and install a grommet, and a short piece of tubing, and route the pcv hose to that. I'm sorry if that is difficult to visualize. One advantage with running a PCV hose like this is the oil vapor is very stable (in combustion) so on older engines that have a large quantity of oil vapor emitting from the PCV you can advance the timing more without detonation. It only halps out a little bit, but is more noticable in lighter cars. Good luck -Kevin
Senior User
Joined: Jan 2002
Posts: 438
Likes: 0
From: Centreville USA
What FFR428 said.
You need to run some sort of crankcase evacuation system unless you enjoy dealing with internal pressure build up with the resultant oil leaks. Even a set of old fashion breathers on the valve covers would be better than nothing.
You need to run some sort of crankcase evacuation system unless you enjoy dealing with internal pressure build up with the resultant oil leaks. Even a set of old fashion breathers on the valve covers would be better than nothing.
Senior User
Joined: Jan 2002
Posts: 438
Likes: 0
From: Centreville USA
Originally Posted by bertha66
You can get a carb base plate with a nipple for the PVC, it would go between the manifold and the carb.
Postmaster
Joined: Feb 2003
Posts: 4,043
Likes: 4
Originally Posted by kkmcclain
I don't know what type of air cleaner you have, but I'll assume a standard round open element. What you can do is drill the underside of the filter base, and install a grommet, and a short piece of tubing, and route the pcv hose to that. [snip]
I really doubt that this setup would provide enough vacuum to make the pcv system work. This would work for the "intake" side of the pcv system (to the oil breather on the driver's side of the engine) to provide clean filtered air to the inside of the engine.
Trending Topics
Posting Guru
Joined: Jul 2003
Posts: 2,232
Likes: 1
From: Colville, Washington
Originally Posted by 76supercab2
I really doubt that this setup would provide enough vacuum to make the pcv system work. This would work for the "intake" side of the pcv system (to the oil breather on the driver's side of the engine) to provide clean filtered air to the inside of the engine.
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
2026 Shelby F-150 Off-Road: Better Than a Raptor R?
Brett Foote
2027 Super Duty Carhartt Package First Look: 12 Things You NEED to Know!
Michael S. Palmer
Thread Starter
|
Fleet Owner
Joined: Jan 2004
Posts: 26,007
Likes: 575
From: Brentwood,CA
ok i i figured it out some fe's had a carb spacer that had the pcv port built in which is why the carb i bought does not have one so i am going to use one of those i found but it also has a coolant passage running through it whats that for.
Lead Driver
Joined: Oct 2004
Posts: 8,062
Likes: 35
From: Central Oregon
Originally Posted by ford390gashog
ok i i figured it out some fe's had a carb spacer that had the pcv port built in which is why the carb i bought does not have one so i am going to use one of those i found but it also has a coolant passage running through it whats that for.
Laughing Gas
Joined: Jan 2002
Posts: 1,008
Likes: 1
From: Tucson
Don't put a T in your brake booster vacuum line. I tried it and it robs enough vacuum from the booster to have a pronounced effect on braking. It's dangerous. Good luck and let us know what you end up doing.
jor
jor
Senior User
Joined: Jan 2002
Posts: 438
Likes: 0
From: Centreville USA
Originally Posted by ford390gashog
ok i i figured it out some fe's had a carb spacer that had the pcv port built in which is why the carb i bought does not have one so i am going to use one of those i found but it also has a coolant passage running through it whats that for.
