Engine wiring???
Thread Starter
|
New User
Joined: Feb 2005
Posts: 5
Likes: 0
Engine wiring???
first of all thank everyone helping me out with my trucks!!found the IDM, was not my problem, pulled all my wires loose on the top of engine started cleaning all conections, well i forgot to plug one back up whata you know she runs runs again!!! but i dont know what it is. tried to find a wiring diagrahm on the net cant find one. the relay /sensor ??? sits down in the valley, the plug is about maybe a dime size.any body that can help!! bought everything else to try were talking 2500.00 last 3 days. but hey any one sees a dumb blonde comming i guess.This is on a 2001 f350. Also anyone out there had any problems with headlight switches in a 99 f250 superduty?
FTE Leadership Emeritus
Joined: May 2001
Posts: 13,653
Likes: 6
From: Cabot, Arkansas
Can you clear up the location a bit? Front, back, left or right head, etc. There are a couple of plugs down there that will make it run poorly, or not at all, like the injection control pressure sensor (ICP) and the pressure regulator for the high pressure oil (IPR), but neither of those should throw an IDM code.
What's the headlight switch doing?
What's the headlight switch doing?
Thread Starter
|
New User
Joined: Feb 2005
Posts: 5
Likes: 0
Engine wiring
Belive it or not the Icp trew codes and made the truck not run, I parked my f250 beside and changed ther icp and that turned out to be the only problem . Thankyou for taking the time to reply and help a girl out. Thanks!!!
In the PSD world, crazy stuff happens every day.
