How to Replace 2000 F-250 tailight
Thread Starter
|
New User
Joined: Oct 2003
Posts: 5
Likes: 0
How to Replace 2000 F-250 tailight
This is the first time i had to change the rear blinker light on my truck. I was able to unscrew 2 visible screws near the tailgate, but there was something else (possible screw) unabling me to completely take off the light fixture. Anyone know if there is another screw that i dont know of that is holding the rear light fixture or am i not pulling hard enough. I tugged on it pretty good but i was starting to think i was going to break the fixture if i was to pull any harder. Thanks for any advise in advance!! 
Elder User
Joined: Oct 2004
Posts: 563
Likes: 3
Nope, its 2 screws on the tailgate side of the light, and 2 clips on the opposite side. With the 2 screws removed, you just have to pull the light straight back, using your fingers to pry the outside edge straight back. Itll pop out.
