10k mod question
Thread Starter
|
Junior User
Joined: Jan 2005
Posts: 55
Likes: 0
10k mod question
I've been reading about the 10k mod and would like to try it. I am new to the diesel world and l have a stock 95psd and i was wondering where to find the injection pressure regulator on my engine. Is there any risk doing this mod if i am going to be towing or plowing with it?
Fleet Mechanic
Joined: Oct 2003
Posts: 1,764
Likes: 0
From: CentralEastern Utah
Look here.......
http://pages.prodigy.net/stevebaz/_i...az/index3.html
It has a article and details on how to. Also great reading on the early PSD's. In my opinion required reading for the PSD owner!
The IPR is located at the front of the drivers side head. Most usually only see a gain in the lower rpms. It ought to work well for plowing.
http://pages.prodigy.net/stevebaz/_i...az/index3.html
It has a article and details on how to. Also great reading on the early PSD's. In my opinion required reading for the PSD owner!
The IPR is located at the front of the drivers side head. Most usually only see a gain in the lower rpms. It ought to work well for plowing.
Last edited by ltfox; Feb 17, 2005 at 10:12 PM.
