sagging driver side door
Thread Starter
|
Junior User
Joined: Oct 2003
Posts: 66
Likes: 0
sagging driver side door
I know someone out there has a fix...looks like the hinge is wearing down and not the pin.
Driver side door on 1992 XLT is sagging about 1/8 inch or so.
Just a thoght has anyone ever tried liquid metal ? or the moldable tappable perma weld ?
thanks ,,
D
Driver side door on 1992 XLT is sagging about 1/8 inch or so.
Just a thoght has anyone ever tried liquid metal ? or the moldable tappable perma weld ?
thanks ,,
D
Thread Starter
|
Junior User
Joined: Oct 2003
Posts: 66
Likes: 0
answers to sagging door problems?
maybe at this posting..
http://draco.acs.uci.edu/explorer/doorhinge.html
hope this helps someone-
BTW the whole site is very helpful lif you havent visited it as of yet.
D
http://draco.acs.uci.edu/explorer/doorhinge.html
hope this helps someone-
BTW the whole site is very helpful lif you havent visited it as of yet.
D
Thread Starter
|
Junior User
Joined: Oct 2003
Posts: 66
Likes: 0
for texan 2004
hey Tex, just to show that this Wolverine doesnt have any hard feelings......
http://draco.acs.uci.edu/explorer/
sorry I should have posted the whole link from the get go. it is a great site.
I do reccommend printing all the topics out on paper - if you have a printer. Reason is that this is actually a mirror site and the original was taken off line. Also having the hard copy under or near the truck is handy as oppsed to running in and out of the house and having your sig other cry about grease on the keyboard.
good luck,
D
http://draco.acs.uci.edu/explorer/
sorry I should have posted the whole link from the get go. it is a great site.
I do reccommend printing all the topics out on paper - if you have a printer. Reason is that this is actually a mirror site and the original was taken off line. Also having the hard copy under or near the truck is handy as oppsed to running in and out of the house and having your sig other cry about grease on the keyboard.
good luck,
D
Cargo Master
Joined: Nov 2004
Posts: 2,858
Likes: 3
From: Friendswood, Texas
Thanks for the link Dougy. I did go ahead and print the whole thing out. I noticed that a couple of the sections did not pull up. No problem, this is a great source for reparis in these vehicles. Thanks again.
