Steering column-to-box coupling
Thread Starter
|
Posting Guru
Joined: Aug 2002
Posts: 1,493
Likes: 1
From: Great NW
Steering column-to-box coupling
Doing a power steering upgrade tomorrow, and getting all of the pieces ready to drop in. On my new PS box, it has a FULLY SPLINED shaft where the steering column coupler attaches to it.
However, the actual coupler on the base of my '78 steering column is only HALF splined, and half "blank." Did I get the wrong PS box, or were there variences between boxes and their input shafts throughout 1978?
However, the actual coupler on the base of my '78 steering column is only HALF splined, and half "blank." Did I get the wrong PS box, or were there variences between boxes and their input shafts throughout 1978?
Tuned
Joined: Mar 2004
Posts: 454
Likes: 0
I did mine on my 78 about 3 years ago and can't remember exactly, but I dont' remember it being any different. I didn't have to change anything from orginal, just replaced the box that bolted right up like the old one did.
