3.73 vs 4.10
Thread Starter
|
New User
Joined: Jan 2005
Posts: 8
Likes: 0
From: western co
3.73 vs 4.10
Going to order a F350 PSD w/DRW and a MANUAL tranny. Does the 3.73 rear have the limited slip? Dont really want the 4.10 because of MPG and i dont tow over 10k.
I drove one with the 4.10s and at like 60 mph my RPMS were 2200-2300.
any opinions or advice would be appreciated!!
thanks
I drove one with the 4.10s and at like 60 mph my RPMS were 2200-2300.
any opinions or advice would be appreciated!!
thanks
Elder User
Joined: Dec 2004
Posts: 819
Likes: 3
From: Putnam Valley, New York
Axle Ratio
I just went to KBB and with an F-350 DRW PSD, the only 2 choices are 4.10 or 4.30. Looks like you will have to get one of those--no 3.73 listed for DRW-PSD. 3.73 locking option is listed for a SRW only.
RON
RON
Last edited by Rongold; Jan 23, 2005 at 02:16 PM.
Thread Starter
|
New User
Joined: Jan 2005
Posts: 8
Likes: 0
From: western co
If you build it on ford direct it will let you choose the 3.73 (no limited slip) but you cannot choose the FX 4 pkg.
Just wondering if ditching the FX4 for the 3.73 is worth it
thanks for the reply
Just wondering if ditching the FX4 for the 3.73 is worth it
thanks for the reply
