Hey whats up guys. I just bought a 99 F250 PSD and the tranny is starting to go out. As far as I was told from the guy i bought it from it has a 60 hp. edge chip and strait piped. I could pul on stock 6.0L PSD pretty good before my tranny went south and because of that people say i have more done than what i said up there. With that said I need any input about some aftermarket tranny's. Ive heard about ATS, and Suncoast and ive heard they are good. But a guy here in Utah told me about PHP trannies and said that they were really good also. I have never heard of PHP and I am wondering if you guys have and if they are any good.
Thanks for all the help!!! Jeron

 

Brians Truck Shop. BTS trannies last in some seriously built PSDs. I would agree that a 60hp chip and a straight pipe are not enough to keep up with even a stock 6.0 so there must be more done to it.

 

Where is BTS located and do they ship around to people. I live in SLC, Ut.
Thanks for the info

 

I had a guy up in West Haven (near Ogden) rebuild mine. So far, so good. Good guy, very reasonable. He will build to whatever power level you think you will need.

SG Transmissions
Scott Gorder
801-732-9071

Worth a call.
Mike

 

Thanks Mike I will!!!!