4x4 not working
Thread Starter
|
Senior User
Joined: Jan 2000
Posts: 259
Likes: 0
From: Mount Sunapee, NH
4x4 not working
I have a 99 ranger 4x4 auto that is not working. I have tried testing some things with no answers. I put the truck in 4hi and in gear with the E-brake on and tried to turn the half shafts at the CV joints on both sides and they did not turn. I then took it out of 4hi and I was able to turn the half shafts. So with that i believe the hubs are not the problem. When I turn the dash dial to 4hi or 4lo they light up and I know it goes into 4lo casue of the low gearing change, but I still don't get any power to the front end in either 4 hi or low. Any help would be a big help.
Thanks
Jeff
Thanks
Jeff
