Melted Connector
Thread Starter
|
Posting Guru
Joined: Jun 2002
Posts: 1,026
Likes: 0
Melted Connector
Okay guys I have a question on a connector in the engine compartment of a 1992 Ford F-150 302 EFI engine. I had a connector touch the exhaust manifold on the drivers side of my engine and it melted the plastic on the connector completely, okay the connector looks exactly like a spout connector that you disconnect when you time the truck, but it's not the spout connector it looks like another spout connector? What purpose does the connector to do for the truck or engine may I ask?
Jason Sage
Jason Sage
Last edited by MustangGT221; Jan 6, 2005 at 12:23 PM. Reason: Title Change
Elder User
Joined: Feb 2004
Posts: 553
Likes: 0
From: North Bend Washington
it mght be the power steering pressure switch connector. mine has the same thing but is not used. if you have the 302 efi w/ E4OD then there is no pressure switch. all other 302's w/C6 or manual will use the pressure switch. if you've got the 351 then it will not use it. i guess they just included the connector in the vehicle harness. i do not know what Ford's stratigy is on when to use it or not to use it.
