Alpine harness wire positions
Looking at the back side of the (where the wires enter) there are two rows of eight wire positions:
1 2 3 4 5 6 7 8
9 10 11 12 13 14 15 16
I have the following:
1: yellow
7: blue/white
9: black
14: orange
16: red
Does anyone know where the remaining wires plug into?
01 = Battery/constant power - Yellow
02 = Left Rear negative - Green/Black
03 = Left Rear positive - Green
04 = Right Rear negative - Purple/Black
05 = Right Rear positive - Purple
06 = empty
07 = Remote turn-on - Blue/White
08 = Power Antenna - Blue
09 = Ground - Black
10 = Front Left negative - White/Black
11 = Front Left positive - White
12 = Front Right negative - Gray/Black
13 = Fromt Right positive - Gray
14 = empty
15 = Audio Interrupt In - Pink/Black
16 = Ignition switched - Red
Last edited by android60; Jan 3, 2005 at 09:31 PM. Reason: Dyslexic fingers



