High steer arms
Thread Starter
|
Post Fiend
Joined: Nov 2001
Posts: 5,871
Likes: 0
From: Coutts Canada
High steer arms
So i'm planning for the sas i doing here to my 81 f-250. The thing is that the axle is of the low pinion variety. Anyway i need to know who makes a decent high steer arm (for p-side), or if there is another (a.k.a. cheaper) alternative to buying the new arm.
Post Fiend
Joined: Jul 2003
Posts: 11,945
Likes: 3
From: Spokane, WA
If you go to ebay and pull up this auction (completed) 5527450384 email the seller and ask him of he has some of those arms available still. I paid $41 for that one and it's perfect. Only thing I had to do was taper the hole for a tie rod end and I also chose to open up the main hole so I could slip the arm over my kingpin cap. You could install the cap on top of the arm and shim the king pin but I like to be difficult. 
