master and slave cylinders
Thread Starter
|
New User
Joined: Aug 2001
Posts: 5
Likes: 0
master and slave cylinders
I recently put a new slave and master cylinder in my 1993 Ranger 2wd and I am not getting any clutch pedal after bleeding it. Is there a certain way I must bleed this in order for it to work.
Freshman User
Joined: Aug 2001
Posts: 29
Likes: 0
master and slave cylinders
There is a bleeding procedure in my Haynes manual, if you dont have the manual I would suggest you run down to Autozone or somewhere similar and pick one up, they are very handy : )
Mike.
Mike.
Posting Guru
Joined: Dec 1999
Posts: 2,351
Likes: 0
From: Benton County, MN
master and slave cylinders
Find the post that has the description on pressure bleeding. It seems to be the only way that works efficiently.
People who say it can't be done should not interrupt the person doing it.
People who say it can't be done should not interrupt the person doing it.
