power mirror wiring problems
Thread Starter
|
New User
Joined: Nov 2004
Posts: 1
Likes: 0
power mirror wiring problems
Hello all, i'm a newbe, but here goes. I put new speakers in my 97 Explorer & didn't have time to put the door panels on the sme day. Anyway the plug (female end, I'm assuming) was smashed when the door shut on it. I saved the wires and sleeve ends attached, but have no idea which sleeve goes to which stud on the back of the controller switch. It seems there is 7 sleeves (on the ends of the wires), but 8 studs to which you could connect to. I've tried many
places, but nobody seems to have any kind of wiring scematic for powered mirrors. If anyone knows anything about this please help!!! Thanks to all.
places, but nobody seems to have any kind of wiring scematic for powered mirrors. If anyone knows anything about this please help!!! Thanks to all.
Postmaster
Joined: Oct 2003
Posts: 4,516
Likes: 1
From: SoCal
The EVTM shows pin 1 on the "power mirror switch" is wired to orange/light green. Pin 8 to pink, pin 3 to dark green, pin 7 to dark blue, pin 4 to red, pin 6 has 2 yellow wires & pin 5 is black. It does'nt show a pin 2??
