Differential Pinion flange
Thread Starter
|
New User
Joined: Jan 2002
Posts: 19
Likes: 0
From: Brigham City USA
Differential Pinion flange
I'm changing my differential from a 4.11 to a 3.73 but I'm having a hard time changing out the flange. Can't get it off. Any ideas or techniques on how to get the lock nut off.
Are all flanges from Dana rear ends interchangable?
Are all flanges from Dana rear ends interchangable?
Logistics Pro
Joined: May 2003
Posts: 4,238
Likes: 21
From: Northern Illinois
By "flange" are you reffering to pinion yoke? If so you need a VERY big 1/2" drive breaker bar sometimes to pop that nut on the pinion yoke free.
Not a 100% sure on Q #2, but most of them should interchange from a dana 60 to another 60, likewise from a 44 to a 44.
Not a 100% sure on Q #2, but most of them should interchange from a dana 60 to another 60, likewise from a 44 to a 44.
