amp wiring questions
Thread Starter
|
New User
Joined: Nov 2004
Posts: 16
Likes: 0
amp wiring questions
i've hooked up amps and subs before, but never on factory unit. i have an 02 explorer xlt, and i was wondering if anyone knows the best place to come through the firewall for the powere wire, and also where do i get power for the turn on lead. or would it just be worth paying my local audio shop 45 dollars to wire the amp for me. thanks any help would be greatly apreciated.
Elder User
Joined: Jul 2003
Posts: 544
Likes: 0
From: Cupertino, CA
Originally Posted by sacul
i've hooked up amps and subs before, but never on factory unit. i have an 02 explorer xlt, and i was wondering if anyone knows the best place to come through the firewall for the powere wire, and also where do i get power for the turn on lead. or would it just be worth paying my local audio shop 45 dollars to wire the amp for me. thanks any help would be greatly apreciated.
Laughing Gas
Joined: Jun 2004
Posts: 1,240
Likes: 3
From: Dallas, Texas
If you have a automatic transmission use the precut holes where the clutch would come through. Also pick up some rubber gaskets to seal the hole and protect the wires.
Your wires can come from the Acc lead off the wires harness to your radio.
Your wires can come from the Acc lead off the wires harness to your radio.
