Holley model 4779-5 750cfm

Thread Tools
 
Search this Thread
 
  #1  
Old 11-15-2004, 10:54 PM
edsf100's Avatar
edsf100
edsf100 is offline
Posting Guru
Thread Starter
Join Date: Sep 2004
Location: Rowland Heights
Posts: 1,674
Received 1 Like on 1 Post
Holley model 4779-5 750cfm

Rebuild or buy a new 750 cfm edlerbrock for $245 (manual choke). The Holley renew kit runs $34 bucks but I have never done this before. I did replace the advance pump gasket, it was leaking. I've sent time on the web on rebuilding the carb, but I'm just looking for some good old advice . 390 FE stock.


 
  #2  
Old 11-17-2004, 05:09 PM
LxMan1's Avatar
LxMan1
LxMan1 is offline
Moderator

Join Date: Dec 2001
Location: Louisville,Ky.
Posts: 22,436
Received 13 Likes on 13 Posts
The 4779 is a bit much for a stock 390, especially if you have an auto tranny. I run a 750 Edelbrock on my 460 and it makes more power and better gas mileage.
 




All times are GMT -5. The time now is 07:21 AM.