Skid plate
Thread Starter
|
New User
Joined: Oct 2004
Posts: 1
Likes: 0
Skid plate
Anyone found a decent after market skid plate? I have an '04 4x4 Screw Lariat. The factory skid plate doesn't do much. The last time I took it to the beach I spent about 45 minutes cleaning sand out of the engine compartment.
Junior User
Joined: Jun 2004
Posts: 81
Likes: 0
I've had desert trucks in the past and all have had custom skidplates. IMO that's the way to go. Just cut a piece of Al. to fit what you need. Also, in my experience, there isn't a skidplate made that keeps out sand...that's not really what they are for.
-Tim
-Tim
Freshman User
Joined: Jun 2004
Posts: 40
Likes: 0
I'm working on some custom parts, one of which is a skid plate. It's not going to keep out sand, but it will protect the front diff. The factory ones are a joke. The one I'm working on, is diamond plate. I haven't settled on a thickness, but could do what ever. Probably around 3/16 or 1/4". I'm also torn between stainless and powder coat. If these work out, I may offer them for sale. If there is enough interest.
PS: The first part that I'm makeing is a real nerf/step bar. Strong enough to offer real protection.
PS: The first part that I'm makeing is a real nerf/step bar. Strong enough to offer real protection.
