no power to blower
Thread Starter
|
New User
Joined: Jun 2003
Posts: 17
Likes: 0
no power to blower
I have a E350 van chassie w/a bus body if I jump power to blower motor it
works and gives me 3 speeds but no power from fact harness to blower switch have power at fuse any one got ideas
works and gives me 3 speeds but no power from fact harness to blower switch have power at fuse any one got ideas
Elder User
Joined: Jan 2004
Posts: 767
Likes: 1
From: Franklin, GA
Check switch on dash for voltage coming from the fuse panel. If none, problem in harness. If you do have voltage coming to the switch, operate the switch selections and see if you have voltage leaving toward the blower. If not, switch is bad. If you have voltage going to the blower motor and you say you have jumped it to assure it is a good motor, you have a problem in the harness between the switch and blower motor.
Thread
Thread Starter
Forum
Replies
Last Post
wharthog
1987 - 1996 F150 & Larger F-Series Trucks
18
Nov 19, 2019 09:06 PM
Quinnbritt
1968-Present E-Series Van/Cutaway/Chassis
3
Jan 28, 2015 10:02 AM
Bulldog_Bubba
Electrical Systems/Wiring
4
Jun 27, 2004 09:05 PM
