Any chip, programmer, or fuel box stackable with six gun/w loader
Thread Starter
|
Senior User
Joined: Dec 2003
Posts: 261
Likes: 0
From: Hamburg, IL
Any chip, programmer, or fuel box stackable with six gun/w loader
Is there anything out there that can be combined with a six gun w/ speed loader? Is ther an Edge "EZ" made for a 6.0L or just the 7.3L? What is a fuel box and/or where can you get one? "PSD 60L FX4" you've toasted a motor already what's your opinion on stacking something with what some of us already have? Sounds like your one of the most knowledgeable people on here anyway
Post Fiend
Joined: Jan 1997
Posts: 23,165
Likes: 18
From: Enjoying the real world.
A fuel box is the only thing you can stack with a programmer. A fuel box is something like the Banks, Edge Juice, Bully Dog. A programmer: Diablo Sport Predator, Superchips Microtuner, etc.
Former Vendor
Joined: Mar 2004
Posts: 4,362
Likes: 3
From: Hendersonville, NC
Originally Posted by PAN
Is there anything out there that can be combined with a six gun w/ speed loader? Is ther an Edge "EZ" made for a 6.0L or just the 7.3L? What is a fuel box and/or where can you get one? "PSD 60L FX4" you've toasted a motor already what's your opinion on stacking something with what some of us already have? Sounds like your one of the most knowledgeable people on here anyway
If you are this greedy for power, there are much better alternatives- the best, IMO, being water injection.
I have stacked my Edge box with the SCMT. It made no power, it sounds like a gigantic ratchet from the dangerously advanced timing, and the EGT's are significantly too high for an engine that has not been treated with ceramic.
Just curious, but how far do you want to go- in terms of performance?
Thread Starter
|
Senior User
Joined: Dec 2003
Posts: 261
Likes: 0
From: Hamburg, IL
PSD 60 FX4,
I'd like this thing to make a statement at the truck pulls and the dodge drivers to say "OMG did you see that!" A banks six gun/ w speed loader alone on a stock 6.0L is not near enough juice to pull the sled. I have an advantage because my truck is a F-350 CC/LB singe rear wheel and most pullers have Reg. Cabs or Ext. Cabs. I dunno what my buddy has done to his "almost identical truck to mine", but he won't tell a soul. It puts out a smoke stream like a pulling tractor, so he's go something mean done to it. I could really careless if it smokes or not, all the better if it didn't, that way no one knows what you have under the hood. Do you have any ideas what he did to it? I seen no mods to the intercooler, the turbo inlet, nor did I see any water, methanol or propane injection. But, who knows I may not know what I'm looking at either. All you can see is an edge attitude chip, MBRP duals and an airrade intake. Any clues?
Thanks
I'd like this thing to make a statement at the truck pulls and the dodge drivers to say "OMG did you see that!" A banks six gun/ w speed loader alone on a stock 6.0L is not near enough juice to pull the sled. I have an advantage because my truck is a F-350 CC/LB singe rear wheel and most pullers have Reg. Cabs or Ext. Cabs. I dunno what my buddy has done to his "almost identical truck to mine", but he won't tell a soul. It puts out a smoke stream like a pulling tractor, so he's go something mean done to it. I could really careless if it smokes or not, all the better if it didn't, that way no one knows what you have under the hood. Do you have any ideas what he did to it? I seen no mods to the intercooler, the turbo inlet, nor did I see any water, methanol or propane injection. But, who knows I may not know what I'm looking at either. All you can see is an edge attitude chip, MBRP duals and an airrade intake. Any clues?
Thanks
