460 hp?
Thread Starter
|
Junior User
Joined: Apr 2004
Posts: 53
Likes: 0
From: bassano alberta canada
460 hp?
ok im on a realy tight budjet. i am building a mud racer, and am going to put a 460 in it.
77 460, stock bottem end (pistons, crank, and rods.), stock heads, weind stelth duell plain alumanium intake, rv cam, pete jackson timeming geares, msd blaster coil, msd 6A electronic box, 3" open headers, and to feed her i was thinking 850 race deamon carb, i also will be running a 125 to 150 shot of juice.
what is my hp before juice and after juice.
my unit ways around 1500 to 2000 lbs
my budjet is 1000 bucks canadian. lie i say tight budjet.
o ya solid lift cam and lifters is what my plans are.
will it hold together for a season or till i can upgrade the rest.
and should i go smaller carb.
any help or sugestions would be very helpfull.
77 460, stock bottem end (pistons, crank, and rods.), stock heads, weind stelth duell plain alumanium intake, rv cam, pete jackson timeming geares, msd blaster coil, msd 6A electronic box, 3" open headers, and to feed her i was thinking 850 race deamon carb, i also will be running a 125 to 150 shot of juice.
what is my hp before juice and after juice.
my unit ways around 1500 to 2000 lbs
my budjet is 1000 bucks canadian. lie i say tight budjet.
o ya solid lift cam and lifters is what my plans are.
will it hold together for a season or till i can upgrade the rest.
and should i go smaller carb.
any help or sugestions would be very helpfull.
FE "Freakin Expensive"
Joined: Dec 2003
Posts: 6,461
Likes: 4
From: Smith Mountain Lake, VA
Cant really say what your HP and TQ would be, without knowing what your cam specs are going to be and your CR.... you said open 3" headers...well thats at the collector...what size are the primary tubes?
Russ
Russ
Thread
Thread Starter
Forum
Replies
Last Post
CaptainJack_7
1987 - 1996 F150 & Larger F-Series Trucks
4
Nov 1, 2014 08:42 AM
tess100
Big Block V8 - 385 Series (6.1/370, 7.0/429, 7.5/460)
6
Mar 30, 2004 06:44 PM
