What to look for?
Thread Starter
|
Senior User
Joined: Mar 2003
Posts: 282
Likes: 0
From: Cloverdale, BC, Canada
What to look for?
Tomorow I'm going to go and look at a used engine for my truck. I need some help. What are some good/bad things that I should look for. I'm not too worried about it because it comes from my brother's, best friends, brother, but none the less I was just looking to find out about a few things that I should look for. Thanks for any help.
Super Moderator
Joined: Apr 2004
Posts: 34,499
Likes: 2,811
Call me silly, but I'd go through any used engine and rebuild it before I put it in anyway. Just make sure there are no holes in the block that don't belong there.
I guess unless the scrappy can guarantee you it was low miles and a runner when he got it, and puts it in writing. (fantasyland maybe)
I guess unless the scrappy can guarantee you it was low miles and a runner when he got it, and puts it in writing. (fantasyland maybe)
New User
Joined: Jan 2008
Posts: 0
Likes: 24
Cloverdale Huh?
I would look for Rust.
I got screwed by a guy in Surrey in 1991.
He advertised a 429 that was completely rebuilt with 25,000Km on it.
I took him at his word (it looked fine on the outside) & got screwed for $500.
That engine had rusted cylinder wall,pistons.
Had a cylinder head been removed I would have said no .
Be very careful in humid climates.
I would look for Rust.
I got screwed by a guy in Surrey in 1991.
He advertised a 429 that was completely rebuilt with 25,000Km on it.
I took him at his word (it looked fine on the outside) & got screwed for $500.
That engine had rusted cylinder wall,pistons.
Had a cylinder head been removed I would have said no .
Be very careful in humid climates.
